FAQ’s

Kitchen cabinet wrapping (also called vinyl wrapping or cabinet film covering) is applying a decorative adhesive film over existing cabinet surfaces (doors, drawer fronts, panels). It refreshes the look of your kitchen without needing a full renovation.

• Cost savings — much cheaper than replacing cabinetry or doing major structural renovations.

• Less mess and disruption — no demolition, fewer trades, less dust. Many wrap jobs can be done in 1–2 days.

• Wide design options — you can choose from many finishes (gloss, matte, wood grain, stone, metallic, soft-touch, etc.).

• Sustainability — preserves existing cabinetry rather than discarding it. Less waste.

• Flat, smooth, and even surfaces work best (e.g. MDF, wood, laminate).

• Textured surfaces (e.g. heavy wood grain, chipboard) may show imperfections through the wrap and can be more difficult.

• Surfaces must be clean, dry, and free of grease, residues or old peeling finishes before applying film.

• Some films can be used on edges, curves, certain hardware, side panels etc. Depending on the film’s properties and installer skill.

Yes — but it depends on the style and detail. For example, shaker doors or panels with moulding/raised detail require more expertise; seams, joints, and detailing make the job more complex. It might cost more or take longer.

If a cupboard door, panel, or drawer front is damaged, we can usually repair it before wrapping. Minor chips, scratches, and dents can be filled and smoothed to create a clean surface for the wrap.

If the damage is too severe, we can help arrange a replacement door or panel and wrap it to match the rest of your kitchen — ensuring a consistent, seamless finish.

The timeframe depends on:

• The size of the kitchen (number of doors, drawers, panels)

• The style of doors (flat vs. decorative)

• The condition of surfaces (whether prep work is needed)

Typical jobs take 1–3 days for an average kitchen. More complex layouts or detailed styles can take a little longer.

With good quality materials, proper installation, and correct care, wrapping can last 5–10 years or more in typical kitchen usage.

Our supplier CoverStyl, offers a 10 year warranty against cracking and fading for most products

• Most good-quality films are fairly resistant to moisture and typical kitchen humidity.

• Films can handle general heat (steam, ambient cooking heat) but are not designed for direct, prolonged exposure to heat sources (e.g. directly behind burners, open flames). Excessive heat can warp or degrade the adhesive.

• Sharp knives, heavy impact or abrasive cleaners can damage the surface. Always follow recommended care instructions.

Yes — one of the advantages is removability. A well-applied film can be removed, and the original surface underneath preserved, especially if the underlying finish was in good condition initially. That said, some care is needed during removal to avoid peeling or damage.

Generally, no — wrapping typically involves the doors, drawer fronts and visible surfaces. Internal parts are not usually affected. However, removing hardware (handles, knobs) and possibly doors can help yield a better finish.

Costs vary based on:

• Number of doors, drawers, panels to cover

• Whether there are side panels, kickboards, plinths etc.

• Type of finish/quality of film chosen

• Complexity: door style, curves/mouldings, prep work required

It’s difficult to state a fixed price without assessing a specific kitchen. We can provide a quote after seeing pictures or measuring.

Yes, in many cases. Worktops can be wrapped with appropriate film finishes (wood effect, marble, stone etc.), but with caveats: worktops are high wear areas (cuts, heat, heavy items) so the wrap’s durability is more challenged there. Splashbacks are often okay if they are flat, clean, and properly prepared.

• Use mild, non-abrasive cleaners. Warm soapy water is usually enough.

• Wipe up spills quickly to avoid staining or lifting.

• Avoid harsh chemicals (e.g. bleach, strong solvents) or abrasive scrubbers.

• Avoid placing very hot items directly on wrapped surfaces; use trivets or protective boards.

• Regularly check edges for lifting and, if needed, apply gentle heat to reseal.

We offer a 2 year warranty on installation and our manufacturer (CoverStyl) offers a 5-10 year warranty on the product. If the wrap delaminates, peels, or shows defects under normal usage, we will inspect and repair or replace as needed.

We have a wide variety of finishes such as:

• Matte, gloss, satin

• Wood grain effects (light wood, dark wood etc.)

• Stone / marble / concrete / metallic effects

• Soft touch / velvet / texture finishes

• Custom colours or special effects
  (Based loosely on Coverstyl’s catalogue of over 470 finishes)

• Cleaning and degreasing surfaces

• Possibly lightly sanding or priming if surfaces are porous, damaged or laminated to improve adhesion (primer / bonding agents exist)

• Cutting tools, squeegee, heat gun (for edges / curves) are typical tools used by the installer.

You can attempt a DIY wrap, especially on flat and simple doors. However, the quality of finish will depend heavily on care, patience, and the right tools/experience. Fancier doors, moulded styles, curves, and high-traffic areas are usually better handled by a professional to ensure longevity and appearance.

Nuva Wrap Co. – Terms & Conditions

(Architectural Vinyl Wrapping for Kitchens, Furniture & Interiors)

These Terms and Conditions are designed to protect both our clients and Nuva Wrap Co. By booking our services, you confirm that you have read, understood, and agreed to be bound by the following terms.

1. Scope of Work

• All quotations are based on visible surfaces only.

• We do not wrap:

  • Underside of base cabinets

  • Tops of wall units

  • Inside of cabinets or drawers

  • Backs of cabinet doors

• Unless otherwise agreed in writing, only visible surfaces will be wrapped.

2. Estimates & Surveys

• Online/phone estimates are based on photos/videos provided by the client. These are approximate only and may change after site inspection.

• For a more accurate assessment, we offer an on-site survey

• Final pricing is confirmed once deposit is received and booking secured.

• Prices may change if:

  • Additional items are added

  • Repairs are needed that were not visible in photos

  • Extra materials are required

• No additional costs will be charged without prior agreement from the client.

3. Materials & Pricing

• From time to time, supplier prices may change before booking is confirmed. If this occurs, we will notify you before proceeding.

• Once booking is confirmed, your quoted price will not change (unless extras are added by agreement).

4. Fixtures, Fittings & Appliances

• Screws, hinges, handles – We are not responsible for pre-existing faults or wear-and-tear. We will exercise care but cannot accept liability for breakages due to existing damage.

• Extractor fans, sinks, taps, integrated appliances – These must be removed/reinstalled by the client or a qualified tradesperson unless otherwise agreed. Nuva Wrap Co. does not handle plumbing or electrical work.

• Kick plates & clips – We will take care when removing, but cannot be held responsible for old/brittle fittings. Replacement clips/fixings may be supplied at an additional charge.

• Electrical fittings (sockets, switches, lighting, wiring, etc.) – We do not carry out electrical work. If adjustments are required, this is the responsibility of the client and a licensed electrician.

5. Surface Preparation & Environment

• Client responsibility: All surfaces to be wrapped must be cleaned, degreased, dust-free, and smooth prior to installation.

• If surfaces are not prepared to the required standard, we may need to carry out additional prep at an extra charge (minimum $200), or reschedule the job. Deposits will not be refunded in these cases.

• Work areas must be cleared of clutter, with safe access provided. Pets and children must be kept out of the work area during installation.

• Nuva Wrap Co. is not responsible for pre-existing surface damage (chips, cracks, unevenness, poor paint/plaster, etc.).

6. Installation

• Standard installation hours are Monday–Friday, 8am–6pm. Weekend work is available at additional cost.

• Full, uninterrupted access to the work area is required for the duration of installation.

• Unavoidable superficial damage (e.g. minor scuffs to paint/walls) may occur; we are not liable for redecoration.

• Appliances must be disconnected/moved before installation if wrapping is required behind them. If not, only accessible areas will be wrapped.

• Heat resistance disclaimer: Vinyl is heat-resistant to manufacturer specifications but must not be exposed to direct flame or temperatures above 75°C. We recommend splashbacks behind cooktops and adequate ventilation near ovens. Damage from heat exposure is not covered under warranty.

7. Completion, Payment & Changes

• A 50% deposit is required to confirm a booking. Dates are only held once deposit is received.

• Remaining balance is payable on completion of works by cash, eftpos or bank transfer.

• Additional items requested during installation will be quoted and must be paid on completion.

• Changes to colour/material selection after booking may incur admin/material charges.

• Cancellations:

  • More than 14 days’ notice – deposit refunded minus $200 cancellations fee

  • Less than 14 days’ notice – deposit is non-refundable

• Rescheduling is permitted once free of charge (with 14+ days’ notice). Further changes may incur a fee.

8. Aftercare & Maintenance

• Clean wrapped surfaces using a damp microfibre cloth and mild, non-abrasive cleaner.

• Avoid bleach, solvents, harsh chemicals, and abrasive sponges.

• Stains (such as turmeric, curry, tomato) should be cleaned immediately to avoid permanent marks.

• Silicone seals applied during installation are a complimentary service only and should be replaced when needed by the client.

9. Warranty

• Vinyl materials are covered by a manufacturer’s warranty of up to 10 years (depending on product). This covers bubbling, de-laminating, fading, or cracking – but not misuse, neglect, or accidental damage.

• Nuva Wrap Co. provides a 24 month installation warranty covering workmanship.

• Warranty does not cover:

  • Damage from water ingress, cleaning chemicals, or heat exposure beyond manufacturer recommendations

  • Surfaces that were not properly maintained or cared for

  • Pre-existing damage or contamination beneath the vinyl

• All warranty claims must be submitted in writing with photos within 14 days of issue being noticed.

10. Repairs

• If repairs are required, we will arrange an inspection within 14 business days.

• Only defects visible from 1 metre or more are covered.

• Repairs due to client damage, misuse, or neglect will be chargeable.

11. Liability & Insurance

• Nuva Wrap Co. accepts no liability for:

  • Existing faulty hinges, handles, screws, electricals, or plumbing

  • Decorative damage to paint, plaster, or wallpaper during normal installation process

  • Appliances or equipment supplied by the client

• Nuva Wrap Co. carries public liability insurance to protect both our team and our clients against accidental damage or injury. A copy of our insurance certificate can be provided on request.

12. Refuse & Waste

• Waste produced during installation (old silicone, packaging, etc.) will be removed by our staff once installation is completed.

13. Conduct & Safety

• Clients (or a representative over 18) must be present at the start and completion of installation.

• Pets and children must be kept away from the work area at all times.

• We operate a zero-tolerance policy towards abusive or threatening behaviour. In such cases, we reserve the right to cease work immediately and no refund will be provided.

14. Compliance with Australian Consumer Law

• Nothing in these terms excludes, restricts, or modifies any rights you may have under the Australian Consumer Law (ACL).

• If our goods or services fail to meet a consumer guarantee under the ACL, you are entitled to remedies including repair, replacement, or refund in accordance with the law.

Summary

By booking with Nuva Wrap Co, you agree to these Terms and Conditions. These conditions are intended to provide transparency, protect your investment, and ensure a smooth and professional installation experience.